The ditch is a dangerous part of Trenching and Excavation of much different construction work, if the necessary security measures are not implemented and are followed carefully, the result can be deadly.
As the time approaches greater Trenching and Excavation activity at construction sites across the country, keeping workers updated with the new safety guidelines becomes as important as ever.
In this article, we will help you protect your team in your next big excavation project by reminding you of the essential security elements.
Then, without more ado, let’s get direct directly to the bottom!
1. Frequent Inspections Of Trenches
To ensure that the excavation area is safe at all times, a competent person must inspect it as often as possible. Do not want to risk the cave or collapse, as they can lead to an injury or worse.
Naming an expert who can help you perform the necessary inspections on a daily basis. They must be experienced, trained, and well informed about this type of work, do not select only anyone for work.
If you do not have anyone who is competent enough for this task, do not hesitate to outsource these services. He can not continue with his excavation project without a security expert at his side.
2. Check The Atmosphere
One of the most dangerous aspects of working in trenches is the possibility of a hazardous atmosphere. Gases such as carbon dioxide and methane are extremely toxic to humans, which means that they should establish specific security measures to keep their workers safe. Atmospheric tests must be done as often as possible to ensure that everything is in order.
Be sure to provide the necessary protective equipment for your workers, including basket stretchers and oxygen masks. Prevention is better than the cure in this specific scenario, so be sure to keep the rescue equipment in the scope of all, regardless of the results of the tests you have done.
3. Check The Public Service Lines Before Starting To Dig
Gas lines or harmful power lines can accidentally raise a serious risk for their workers. They have to know where they are at all times, otherwise, there could be serious consequences. You must call your local public service agencies to help you mark each line of public services that is present on the site before you have started your excavation project.
Even if you are lucky and nobody gets hurt when a line of public services is damaged by the excavation team, you will still have to pay strong fines for the damage it has caused. It is something that you should avoid at all costs, especially if you are working in an urban area.
If you are not sure where you get this information, we recommend that you do some research on local public service agencies. You will find the necessary contacts quite easily, so do not forget to do so before your project has begun.
4. Gears And Protective Equipment
Your workers should always use a quality protection team and have a rescue team near them to stay safe. This type of equipment can be quite expensive, but getting it is more than necessary if you are planning to do an excavation job.
Now, if your team does not have a lot of experience with ditches or excavations, and does not have the budget to equip them with the best protective equipment, it may be improving someone who does work for you. There are many contractors experienced out there that you can hire, such as this angels excavation contractor www.excavatingcontracortosangelaces.com, so do not hesitate to do so if it considers necessary.
5. Safety Signals Should be Placed Around the Site
Although it seems trivial, large boards should be placed with appropriate warnings near trenches to avoid accidents and injuries. Both construction workers and vagabond bystanders could accidentally fall into the ditch, suffering major injuries. The danger signs can be an effective way to prevent that, especially if you are working in a busy urban area like Los Angeles, for example.
We recommend that you use colors in bold and large sources in these signs so that they can be seen from afar. In addition, the installation of protective fences around the construction site can be a useful way to prevent people from staying in danger.
6. Never Work Under High Loads
Working under high loads is something that should be avoided at all costs, you never know when something can go wrong. Keep all the ditch’s heavy machinery when someone is working there.
In addition, all workers should stay away from the lifting team carrying heavy loads. If something happens as a malfunction, they would be at risk of serious injury, possibly even death. Make sure everyone on the site is aware of this at all times, both workers who work in trenches and those who operate elevation machinery.
7. Access and Graduation Points Must be Safe and Easy to Achieve
All its workers must remain close to the points of access and graduation at all times. It is the only way you can make sure you are in a position to be evacuated quickly if something goes wrong. These points should also be easy and safe to use, be sure to choose something of the highest possible quality. This especially goes if you are digging a deep meter.
Again, if you are not sure, you can follow and adhere to all the security tips we have mentioned above, maybe it is better to hire a ditch contractor to do the job for you. There are too many things that can go wrong during an excavation project if you are not competent enough to supervise it, so do not start without preparation.
The Bottom Line
Excavation and ditch work can be incredibly dangerous, especially if you are not following the latest safety protocols of the industry. There is no sufficient reason to risk the lives of your workers, so be very careful when working with excavation equipment.
In this article, we have provided some of the most crucial tips to keep everyone on the site safe and protected during the project. We hope you have found it useful, and we wish you the best of luck in all your future efforts.